Solar Gard® performance specifications

Performance results were generated from testing 1/8” (3mm) thick clear glass and have been measured, calculated and reported in accordance with ASTM, ASHRAE and AIMCAL standards. Performance results are subject to variations within industry standards.

Film Type	Solar Energy			Visible Light				Thermal Energy			UV Light Blocked T%	Total Solar Energy Rejected
Film Type	T%	A%	R%	T%	Ext. R%	Int. R%	E	Wtr U-Val	SC	SHGC	UV Light Blocked T%	Total Solar Energy Rejected
Clear Glass
Clear Glass_4.INTL	81	11	7	89	8	8	.84	5.80	.98	.85		15
Clear Safety & Security
2 Mil Clear_4.INTL	75	14	10	84	12	12	.85	5.83	.93	.81	>98	19
4 Mil Clear_4.INTL	77	14	8	88	9	9	.90	5.96	.95	.83	>99	17
7 Mil Clear_4.INTL	76	15	8	88	9	9	.90	5.95	.95	.83	>99	17
8 Mil Clear_4.INTL	73	16	11	84	13	12	.88	5.89	.91	.79	>99	21
10 Mil Clear_4.INTL	75	15	8	87	10	10	.88	5.88	.93	.81	>99	19
11 Mil Clear_4.INTL	76	15	8	87	9	9	.89	5.90	.94	.82	>98	18
14 Mil Clear_4.INTL	75	16	8	86	10	10	.89	5.89	.93	.81	>98	19
Solar Safety & Security
4 Mil Solar Bronze 20_4.INTL	9	43	47	17	38	39	.68	5.33	.28	.24	>99	76
4 Mil Solar Bronze 35_4.INTL	18	41	40	31	28	27	.68	5.33	.38	.33	>99	67
4 Mil Solar Bronze 50_4.INTL	28	37	34	44	22	21	.69	5.36	.48	.42	>99	57
4 Mil Stainless Steel 20_4.INTL	20	57	22	22	27	25	.85	5.82	.48	.42	>99	57
4 Mil Stainless Steel 30_4.INTL	29	54	16	32	20	17	.88	5.90	.58	.50	>99	50
4 Mil Stainless Steel 50_4.INTL	41	47	11	46	13	11	.90	5.96	.69	.59	>99	41
8 Mil Silver 20_4.INTL	9	41	48	14	57	59	.70	5.38	.28	.24	>99	76
8 Mil Silver 35_4.INTL	25	42	32	35	35	33	.71	5.41	.46	.40	>99	60
8 Mil Stainless Steel 20_4.INTL	18	59	21	21	26	24	.86	5.83	.48	.41	>99	59
8 Mil Stainless Steel 35_4.INTL	33	53	13	38	15	13	.88	5.89	.62	.54	>99	46
8 Mil Stainless Steel 50_4.INTL	38	50	11	43	13	11	.88	5.89	.67	.58	>99	42
10 Mil Silver 20_4.INTL	11	40	47	17	56	55	.70	5.37	.30	.26	>99	74
10 Mil Stainless Steel 30_4.INTL	38	48	13	43	15	12	.84	5.76	.65	.56	>99	44
10 Mil Stainless Steel 60_4.INTL	51	39	9	57	11	9	.88	5.88	.76	.66	>99	34
4 Mil Clear OSW SRX_4.INTL	77	13	8	88	9	9	.84	5.79	.95	.83	>99	17
4 Mil Graffit Gard SRX_4.INTL	78	13	8	89	9	9	.84	5.79	.96	.83	>98	17
6 Mil Graffit Gard SRX_4.INTL	77	13	8	88	9	9	.84	5.78	.95	.83		17
7 Mil Graffit Gard SRX_4.INTL	77	14	8	88	9	9	.84	5.77	.95	.83		17
8 Mil LX70_4.INTL	38	32	30	72	9	10	.79	5.64	.57	.49	>99	51

These test data contain only results arrived at after employing specific test procedures and standards. The included data do not constitute a recommendation for, endorsement of, or certification of the product or material tested. These data are provided for informational purposes only and are not to be considered part of the basis of any bargain or transaction involving Bekaert Specialty Films, LLC's ("BSF") products. BSF makes no representation or warranty, expressed or implied, including the implied warranties of merchantability or fitness for a particular purpose, that its products will conform to these test data. BSF's limited warranty should be carefully reviewed prior to purchasing any BSF product. Extrapolation of data from the sample or samples relating to the batch or lot from which data were obtained may not correlate and should be interpreted accordingly with caution. BSF shall not be responsible for variations in quality, composition, appearance, performance, or other feature of similar subject matter produced by persons or under conditions over which BSF has no control.